solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com designer?s data sheet part number/ordering information 1 / 1N3909 __ __ screening 2 / __ = not screened tx = tx level txv = txv level s = s level pin configuration __ = normal (cathode to stud) (see table 1) r = reverse (anode to stud) family/voltage 1N3909 = 50v 1n3910 = 100v 1n3911 = 200v 1n3912 = 300v 1n3913 = 400v 1N3909 thru 1n3913 30a, 200nsec, 50-400 v fast recovery rectifier features : ? fast recovery: 200ns ec maximum (100nsec typ.) 3 / ? low reverse leakage current ? single chip construction ? piv to 400v, higher voltages available ? hermetically sealed isolated package ? high surge rating ? tx, txv, and s-level screening available 2 / maximum ratings 4 / symbol value units peak repetitive reverse voltage 1N3909 1n3910 1n3911 1n3912 1n3913 v rrm v rwm v r 50 100 200 300 400 volts average rectified forward current (resistive load, 60 hz sine wave, t a = 25 c) io 30 amps peak surge current (8.3 ms pulse, half sine wave, t a = 25 c, per leg) i fsm 300 amps operating & storage temperature t op t stg -55 to +150 -65 to +175 oc maximum total thermal resistance junction to case r jc 1.2 oc/w notes: 1/ for ordering information, price, operating curves, and availability- contact factory. 2/ screened to mil-prf-19500. 3/ recovery conditions: i f = 500 ma, i r = 1 amp, i rr = 250 ma. 4/ unless otherwise specified, all maximum ratings/electri cal characteristics @25 c. do-5: note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0114a doc
solid state devices, inc. 14701 firestone blvd * la mirada, ca 90638 phone: (562) 404-4474 * fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com 1N3909 thru 1n3913 electrical character istics (per leg) 4 / symbol max units maximum instantaneous forward voltage drop (pulsed) i f = 30a, t a = 25 oc i f = 30a, t a = -55 oc v f1 v f2 1.40 1.50 v dc maximum reverse leakage current (rated v r minimum) t a = 25 oc t a = 100 oc i r1 i r2 80 10 a ma maximum reverse recovery time ( i f = 500 ma, i r = 1 amp, i rr = 250 ma) t rr 200 nsec typical junction capacitance (v r = 10v dc , t a = 25oc, f = 1mhz) c j 200 pf notes: 1/ for ordering information, price, operating curves, and availability- contact factory. 2/ screened to mil-prf-19500. 3/ recovery conditions: i f = 500 ma, i r = 1 amp, i rr = 250 ma. 4/ unless specifi ed otherwise, all maxi mum ratings/electrical ch aracteristics are @25 c. table 1- pin assignment code configuration terminal stud __ normal anode cathode r reverse cathode anode do-5 outline (normal pin configuration shown): note: all specifications are subject to change without notification. scd's for these devices should be re viewed by ssdi prior to release. data sheet #: rc0114a doc
|
